PRODUCT DOCUMENTATION
Gas-spring tubes.
Defined document scope.
Review the supplied ECM verification, GTS report and their annexes for the listed SAE1008 welded tubes.
Models listed in both annexes.
| Material | OD × wall (mm) | Product standard listed |
|---|---|---|
| SAE1008 | 18 × 1 | GB/T 33156-2016 |
| SAE1008 | 22 × 1 | GB/T 33156-2016 |
| SAE1008 | 15 × 1 | GB/T 33156-2016 |
The listed document scope is separate from DOM’s wider product and regular production-size programmes.
Open original PDF · 2 pages ↗ECM · TECHNICAL DOCUMENTATION
Voluntary document verification.
- Document number
- 0P260402.JDUS24
- Issuer
- Ente Certificazione Macchine Srl
- Holder, as printed
- Jiangsu Dioum Co., Ltd.
- Issued
- 02 April 2026
- Expiry printed on document
- 01 April 2031
- Referenced standard
- EN 10204:2004
The document states that the verification concerned technical documentation only and that no verification was carried out on the product.
Issued under a voluntary, non-notified procedure for products intended for third countries outside the EU market. It does not replace an EC Declaration of Conformity and should not be read as EU market-access approval or certification of DOM’s entire product range.
Open original PDF · 4 pages ↗GTS · ACCOMPANYING REPORT
Report and listed models.
- Report number
- TPJS26031883884
- Issuer
- Shanghai Global Testing Services Co., Ltd.
- Report date
- 30 March 2026
- Referenced standard
- EN 10204:2004
The report and annex concern the three SAE1008 gas-spring welded tube sizes listed above. Read the original document for its stated scope.
This report does not contain heat- or lot-specific chemical and mechanical test results. Material documents and inspection requirements for an order should be agreed with DOM for that order.